PP912TM/KM/BM
GE Profile™ 30" Built-In CleanDesign Electric Cooktop
Dimensions and Installation Information (in inches)
†Note: Check local codes for required breaker size
13" MAX.
depth
KW Rating
21-3/8
29-3/4
Important: Requires a 5" free area between the
bottom of the cooktop to any combustible material,
i.e., shelving. Free area not required when installing
wall oven underneath cooktop. Refer to installation
instructions. Requires a 15" minimum from cooktop to
adjacent overhead cabinets. Units are furnished with a
48" flexible armored cable.
3-1/4*
7.6
5.7
240V
208V
Cooktop
Breaker Size
30" MIN. to
unprotected
cabinet
19-5/8
40 Amps†
30 Amps†
240V
208V
1-1/2 MIN.
"
15" MIN.
to cabinet
clearance to
side wall
28-1/2
1-3/4
rear wall
"
to
from cut-out
Note: 30" Ribbon cooktops are approved for use over select GE 27" and GE 30"
Single Wall Ovens and Warming Drawers. Refer to cooktop and wall oven/
warming drawer installation instructions packed with product for current
dimensional data. If installed with a GE Profile™ Telescopic Downdraft System,
consult both the cooktop and downdraft installation instructions packed with
product before installing. Cooktop gas/electric supply may need to be re-routed
to install downdraft. Consult cabinet and countertop manufacturer’s specs for
flush mount installation prior to install. Before installing, consult installation
instructions packed with product for current dimensional data.
2-1/2**
Required
1-1/2 MIN.
"
*Depth of unit at conduit connection location (rear) is
6-1/2" on models PP980/975/950/945 and 4-5/8"
on models PHP900/PP972/962/942/932/912,
JP655/356/346.
clearance to
side wall
from cut-out
Cut should
not interfere
with cabinet
structure
**Raised bull nose countertops may require up to
3/8" additional clearance to prevent interference
with curved front.
Electrical junction box 16" MIN.
below countertop
at front
Filler Trim Kit: When replacing an old GE 30" cooktop (with larger opening)
use the following one-piece trim kit to fill in the over-size hole. Available at
additional cost. JXTR32W (True White) JXTR32B (Black glass) JXTR32C (True
Bisque)
For answers to your Monogram,® GE Profile™ or
GE® appliance questions, visit our website at
ge.com or call GE Answer Center® service,
800.626.2000.
Listed by
Underwriters
Laboratories
220581
Specification Revised 12/07
|