KH 2370
DVD Surround Sound Combination Unit
Operating Instructions
En
Index
Technical Data
7
Combination unit/Main unit........................................................................................................................................... 7
Radio section .................................................................................................................................................................. 7
Disc section ..................................................................................................................................................................... 7
Subwoofer........................................................................................................................................................................ 7
Playable CDs and DVDs................................................................................................................................................... 7
DVD video..................................................................................................................................................................................................................... 7
CD Audio ....................................................................................................................................................................................................................... 7
Scope of supply
7
7
8
Application and function
Setting up the combination unit /Safety information
Control elements, displays and connections ................................................................................................................ 9
... on the unit ................................................................................................................................................................................................................. 9
... on the back of the combination unit .............................................................................................................................................................. 9
... on the front of the subwoofer ............................................................................................................................................................................ 9
... on the back of the subwoofer............................................................................................................................................................................. 9
... on the back of the surround loudspeakers .................................................................................................................................................10
... on the remote control .........................................................................................................................................................................................10
Preparing the combination unit for operation
11
Remote control .............................................................................................................................................................. 11
Replacing the batteries..........................................................................................................................................................................................11
Connecting the combination unit to a television ....................................................................................................... 11
Connecting to a television by means of a scart cable/RGB.......................................................................................................................11
Connecting to a television by means of S-Video ..........................................................................................................................................12
Connecting to a television by means of video input (composite video) .............................................................................................12
Connecting the antenna to the combination unit ...................................................................................................... 12
Connect the headphones to the combination unit .................................................................................................... 12
Connecting to digital audio components.................................................................................................................... 12
Connect the surround loudspeakers and subwoofer to the combination unit ....................................................... 13
Positioning the surround loudspeakers...........................................................................................................................................................13
Initial operation of the combination unit
13
Operating the OSD menu ............................................................................................................................................. 13
Necessary settings to the combination unit before initial use .................................................................................. 14
Set television standard...........................................................................................................................................................................................15
MULTI............................................................................................................................................................................................................................15
NTSC..............................................................................................................................................................................................................................15
PAL.................................................................................................................................................................................................................................15
Setting video output ..............................................................................................................................................................................................15
S-VIDEO........................................................................................................................................................................................................................15
RGB................................................................................................................................................................................................................................15
Setting playback language ..................................................................................................................................................................................15
Setting subtitle language .....................................................................................................................................................................................16
Set the language of the disc menu ...................................................................................................................................................................16
3
KH 2370
Switching on/off disc navigation menu ..........................................................................................................................................................16
General settings .......................................................................................................................................................................................................16
Set picture format ....................................................................................................................................................................................................16
NORMAL/PS ...............................................................................................................................................................................................................17
NORMAL/LB................................................................................................................................................................................................................17
WIDE .............................................................................................................................................................................................................................17
Setting the language of the OSD menus ........................................................................................................................................................17
Switch on the screensaver ...................................................................................................................................................................................17
Loudspeaker settings .............................................................................................................................................................................................17
DOWNMIX...................................................................................................................................................................................................................17
CENTER.........................................................................................................................................................................................................................18
REAR..............................................................................................................................................................................................................................18
Subwoofer...................................................................................................................................................................................................................18
CNTR DELAY ...............................................................................................................................................................................................................18
REAR DELAY................................................................................................................................................................................................................18
TEST TONE ...................................................................................................................................................................................................................18
Set the volume level of the surround loudspeakers ...................................................................................................................................18
Other audio settings ..............................................................................................................................................................................................19
Setting audio output ..............................................................................................................................................................................................19
Settings for mono VCDs/S-VCDs.........................................................................................................................................................................19
Dynamic range compression/Set midnight mode .....................................................................................................................................19
Using the combination unit
19
General functions of the combination unit ................................................................................................................ 20
Setting playback volume ......................................................................................................................................................................................20
Switching the playback sound to mute (Mute) .............................................................................................................................................20
Equalizer functions..................................................................................................................................................................................................20
Setting the clock ......................................................................................................................................................................................................20
Using the timer ........................................................................................................................................................................................................20
Using the sleep timer..............................................................................................................................................................................................21
Childproof protection.............................................................................................................................................................................................21
Switch on the childproof protection.................................................................................................................................................................21
G .....................................................................................................................................................................................................................................21
PG...................................................................................................................................................................................................................................21
PG-13 ............................................................................................................................................................................................................................22
PG-R...............................................................................................................................................................................................................................22
NC-17............................................................................................................................................................................................................................22
ADULT...........................................................................................................................................................................................................................22
Selecting your own password .............................................................................................................................................................................22
Setting back the combination unit to the settings made in the factory .............................................................................................22
Switching off the combination unit ..................................................................................................................................................................23
Radio mode
23
Saving radio station ................................................................................................................................................................................................23
Improving the reception of FM/very high frequency radio stations ....................................................................................................23
Improving the reception of AM/medium wave radio stations ................................................................................................................23
DVD/VCD/S-VCD mode
24
Playing back DVDs, VCDs or S-VCDs ............................................................................................................................ 24
Functions when playing back a DVD, VCD or S-VCD................................................................................................... 24
To pause playback (Pause) ....................................................................................................................................................................................24
Stopping the playback (Stop) ..............................................................................................................................................................................24
Playback stop with resume function ................................................................................................................................................................24
Playback stop without resume function..........................................................................................................................................................24
Calling up disc menu (Menu)...............................................................................................................................................................................25
Rapid search forwards/backwards ....................................................................................................................................................................25
4
KH 2370
Slow motion playback forwards/backwards (Slow).....................................................................................................................................25
Frame by frame advance (Step) ..........................................................................................................................................................................25
Picture enlargement (Zoom)................................................................................................................................................................................25
Change the angle of the camera (Angle).........................................................................................................................................................26
Showing/hiding subtitles .....................................................................................................................................................................................26
Changing playback language .............................................................................................................................................................................26
Showing disc information ....................................................................................................................................................................................26
Selecting chapters ...................................................................................................................................................................................................26
Skip to the beginning of the chapter (Skip)....................................................................................................................................................26
Selecting chapters with chapter numbers .....................................................................................................................................................26
Select passages of chapters according to time positions .........................................................................................................................27
Repeat playback ......................................................................................................................................................................................................27
Repeating sequences ............................................................................................................................................................................................27
Audio CD mode
27
Playing back of audio CDs ............................................................................................................................................ 27
Functions when playing back audio CDs .................................................................................................................... 27
Pause playback (Pause)..........................................................................................................................................................................................27
Stop playback (Stop)...............................................................................................................................................................................................27
Playback stop with resume function.................................................................................................................................................................27
Playback stop without resume function .........................................................................................................................................................28
Select titles .................................................................................................................................................................................................................28
Skipping to the beginning of the title (Skip)..................................................................................................................................................28
Selecting a title using the number buttons ...................................................................................................................................................28
Selecting passages of titles with time positions ..........................................................................................................................................28
Programmed playback...........................................................................................................................................................................................28
Repeat playback .......................................................................................................................................................................................................28
Repeating sequences ............................................................................................................................................................................................29
MP3/JPEG mode
29
Playback MP3/JPEG files............................................................................................................................................... 29
Functions when playing back MP3/JPEG files............................................................................................................. 29
Pause playback (Pause)..........................................................................................................................................................................................29
Stop playback (Stop)...............................................................................................................................................................................................29
Playback stop with resume function ................................................................................................................................................................29
Playback stop without resume function .........................................................................................................................................................29
Selecting a file ...........................................................................................................................................................................................................29
Skip to the beginning of the title (Skip) ...........................................................................................................................................................29
Selecting files with number buttons ................................................................................................................................................................30
Only to play back MP3 Select file passages using time position ............................................................................................................30
Only to play back MP3 Repeating sequences (A–B) ....................................................................................................................................30
Only to play back JPEG Rotating pictures........................................................................................................................................................30
Operating the SMART NAVI menu......................................................................................................................................................................30
Changing folders (If folders exist).......................................................................................................................................................................31
Selecting playback mode (Play Mode) ............................................................................................................................................................31
FOLDER ........................................................................................................................................................................................................................32
FOLDER REP................................................................................................................................................................................................................32
DISC SCAN ..................................................................................................................................................................................................................32
DISC...............................................................................................................................................................................................................................32
DISC REP ......................................................................................................................................................................................................................32
RANDOM.....................................................................................................................................................................................................................32
SHUFFLE ON...............................................................................................................................................................................................................32
PROGRAM PO ............................................................................................................................................................................................................32
SINGLE..........................................................................................................................................................................................................................33
REP-ONE ......................................................................................................................................................................................................................33
Selecting playback mode .....................................................................................................................................................................................33
Programmed playback (Program)......................................................................................................................................................................33
5
KH 2370
Cleaning the combination unit
33
33
To rectify malfunctions and errors
Nothing appears on the display/combination unit shows no function, although it is switched on ........................................33
Display shows No Disc, although a disc has been inserted ......................................................................................................................34
Inserted disc is not being played back .............................................................................................................................................................34
No picture or black and white picture .............................................................................................................................................................34
No sound.....................................................................................................................................................................................................................34
No 43 or 169 picture ...............................................................................................................................................................................................34
Remote control without function ......................................................................................................................................................................34
Playback language/Subtitle language does not correspond to the language in the settings in the OSD menu ................34
One or more functions cannot be switched on ............................................................................................................................................34
No button on the unit or on the remote control works/other malfunctions .....................................................................................35
Glossary/Index
35
What are DVDs, VCDs and S-VCDs? .............................................................................................................................. 35
DVDs .............................................................................................................................................................................................................................35
VCDs/S-VCDs..............................................................................................................................................................................................................35
What are titles and chapters? ....................................................................................................................................... 35
What are Scart, S-Video, composite video? ................................................................................................................. 35
Scart ..............................................................................................................................................................................................................................35
S-Video.........................................................................................................................................................................................................................35
Composite video ......................................................................................................................................................................................................35
Decoder.......................................................................................................................................................................... 36
Dolby Surround ............................................................................................................................................................. 36
Dolby Prologic ............................................................................................................................................................... 36
Dolby Digital (5.1) ......................................................................................................................................................... 36
DTS.................................................................................................................................................................................. 36
What are PAL, NTSC and SECAM? ................................................................................................................................. 36
PAL.................................................................................................................................................................................................................................36
NTSC..............................................................................................................................................................................................................................36
SECAM..........................................................................................................................................................................................................................36
Audio CDs....................................................................................................................................................................................................................36
MP3 ...............................................................................................................................................................................................................................36
JPEG...............................................................................................................................................................................................................................36
What are folders?........................................................................................................................................................... 36
6
KH 2370
Technical Data
Application and
function
Combination unit/Main unit
Power supply: .............................AC 230 V ~ 50 Hz
Output (per channel): ..............7 Watt RMS at 4 Ohm
Power consumption:................60 Watt
The eBench KH combination unit is exclusively
intended
•
as a consumer electronics system
to play back
Radio section
•
AM band: ......................................522 - 1620 KHz
FM band:.......................................87.5 - 108 MHz
•
DVD videos with 120 mm (diameter) and 80 mm (di-
ameter) formats with the country/region code 2 or
marked with the logo
Disc section
Frequency response (-6dB):...20-15 000 Hz
Signal-to-noise ratio:................50 dB
Harmonic distortion:................0.4%
Channel separation: .................40 dB
•
Video CDs (VCDs) and Super Video CDs (S-VCDs) with
120 mm (diameter) and 80 mm (diameter) formats,
marked with the logo
•
•
•
•
Audio CDs with 120 mm (diameter) and 80 mm (diam-
eter) formats, marked by the logo
Subwoofer
Output (per channel): ..............50 Watt RMS at 4 Ohm
Power consumption:................70 Watt
in general CD audio (.cda), MP3 (.mp3) and JPEG (.jpg)
file formats on CD-R and CD-RW storage media.
Playable CDs and DVDs
DVD video
5.1 channel surround sound, if it is available on the
playback media
to pick up UKW (FM) and medium wave (AM) radio sta-
tions
12 cm single-sided, single-layered
12 cm single-sided, double-layered
12 cm double-sided, double-layered
8 cm single-sided, single-layered
8 cm single-sided, double-layered
8 cm double-sided, double-layered
•
•
for stationary application in closed rooms
for private, non-commercial use
The eBench KH combination unit can be
connected to the following for video display when
playing back DVDs, VCDs and S-VCDs:
CD Audio
12 cm CD, 8 cm CD
•
Stereo and mono televisions with PAL or SECAM tel-
evision formats and the picture formats 4:3, 4:3 Pan &
Scan, 16:9
Scope of supply
•
Video projectors, if they have the corresponding
connections and the connection of a DVD player is
provided/allowed by the manufacturer of the video
projector
1. DVD surround system combination unit
2. Subwoofer
3. Infrared remote control
4. Satellite loudspeakers (2 x front, 2 x rear, 1 x center)
5. 5 loudspeaker cables (3 x short, 2 x long)
6. 2 cinch cables
The eBench KH combination unit can be
connected to the following for output sound or
music:
7. 1 S-Video cable
8. Operating instructions
•
•
The supplied surround loudspeakers and the subwoof-
er of the combination unit
Loudspeakers of one of the televisions connected to
the combination unit
7
KH 2370
•
•
Headphones with 3.5 mm jack plug connection
external (analog and digital) audio components
Warning!
If water runs into the combination unit or if it falls into
water, this can cause irreparable damage to the unit and
there is a risk of getting an electric shock!
Attention!
No liability/guarantee will be assumed for damages,
which are caused by the inappropriate use of the equip-
ment!
•
in cupboards, shelves or other closed furniture or on
beds and blankets, otherwise the ventilation of the
combination unit can be restricted and then it can
overheat.
Setting up the
For the same reason do not put any other devices on top
of the combination unit.
combination unit /
Safety information
To guarantee sufficient ventilation, the combination unit
must have a distance from the back, top and sides of at
least 10 cm to walls and any other objects at the cho-
sen installation location.
1
Take
Warning!
•
the combination unit
the subwoofer
the surround loudspeakers and
the supplied accessories
•
•
•
Overheating can cause irreparable damage to the com-
bination unit and there is a risk of fire!
Attention!
carefully out of the packaging.
For damages to the combination unit, which have arisen
due to
2
Put the combination unit and the components on a
flat, level and non-slip surface.
•
•
•
effects of moisture
water which has penetrated into the unit
overheating,
Attention!
To avoid malfunctions, damages and the risk of an elec-
tric shock, do not use the combination unit:
no liability/guarantee will be assumed!
•
directly near to sources of heat such as stoves, fan
heaters and similar devices! Heat influences can cause
the combination unit to overheat and the plastic parts
to melt, whereby irreparable damage can be caused to
the combination unit!
Warning!
In the case of overheating there is also a fire risk!
•
in damp environments, for example in cellars or in the
sauna! Moisture, which has penetrated into the unit,
can cause malfunctions and thus cause irreparable
damage to the unit!
Warning!
If moisture penetrates into the unit, there is a risk of get-
ting an electric shock!
•
directly near to water, for example near the bath or a
swimming poor. Also do not place any container filled
with water – such as e.g. vases – on the combination
unit and its components.
8
KH 2370
Control elements, displays and connections
... on the unit
1. POWER button
2. Display
3. CD/DVD button
4. TUNER/BAND button
5. AUX button
6. REPEAT/MEM DN button
7. PAUSE/MEM UP button
8. PLAY/ENTER button
9. Volume control Volume +/-
10. OPEN/CLOSE button
11. PRESET EQ button
12. STOP button
2
8
1
3
4
5
6
7
10
11
17 16 15 14 13 12
9
13. SKIP forwards button
14. SKIP backwards button
15. TIMER button
18
16. MODE button
19
17. CLK ADJ button
18. Disc tray
19. Headphone jack PHONES
... on the back of the combination unit
1. Scart jack
2. Video jack
3. S-Video jack
4. Coaxial jack
5. Subwoofer jack
6. AUX IN L + R jacks
7. Rear terminal L
8. Rear R terminal
9. CENTER terminal
10. Front L terminal
11. Front R terminal
12. Power cord
1
2
3
5
14
13
10
8
4
13. FM dipole antenna (non-detachable)
14. AM terminal
11
9
7
6
12
... on the front of the subwoofer
POWER button
Volume control
... on the back of the subwoofer
Subwoofer IN jack
Power cord
Power switch
9
KH 2370
... on the back of the surround loudspeakers
each with +/- terminal
... on the remote control
1. POWER button
2. SLEEP button
2
3
3. TIMER button
4. OPEN/CLOSE button
5. SETUP button
4
1
13
12
11
10
8
6. CLEAR button
7. Vol + button
8. Vol – button
9. MUTE button
10. PRE-EQ button
11. AUX button
12. TUNER/BAND button
13. CD/DVD button
14. Number buttons 0 to 9 and 10 +
15. MENU button
14
9
7
5
6
15
16
19
16. TITLE button
17. ZOOM button
18. DISPLAY button
19. Control buttons up, down, left, right
20. ENTER button
21. REW button
20
18
17
22. FWD button
23. SKIP backwards button
24. SKIP forwards button
25. STOP button
26. PLAY button
27. PAUSE button
28. STEP button
29. REPEAT button
30. SHUFFLE button
31. GOTO button
21
25
29
33
37
24
28
32
36
40
22
26
30
34
23
27
31
35
32. SLOW button
33. A-B button
38
39
34. AUDIO button
35. SUBTITLE button
36. ANGLE button
37. MODE button
38. CLK ADJ button
39. MEMORY button
40. MONO/ST. button
10
KH 2370
Connecting the combination unit to a
television
Preparing the
combination unit for
operation
After having set up the combination unit, you can now
connect it to a television. The combination unit can be
connected to a television with PAL, NTSC and SECAM tel-
evision standards.
Remote control
If you would like to use the combination unit with a televi-
sion with
1
Open the battery compartment on the back of the re-
mote control and remove the cover of the
battery comparment.
•
NTSC standard, then you have to change the video set-
tings of the combination unit. This can be done in the
so-called OSD menu of the combination unit. There
you will find that PAL has been set by the factory as the
television standard.
2
Now put in two batteries type AAA/LR 03 (round cells,
not included in the scope of supply) into the battery
compartment. Take care that the batteries are inserted
with the correct polarity.
•
SECAM standard, then you do not have to make any
changes to the settings in the OSD menu. The settings
for the PAL standard also enable the combination unit
to be operated with SECAM television sets. However to
do this, SECAM televisions sets must be able to process
PAL signals.
3
Put the cover of the battery compartment back on to
the back of the remote control.
Replacing the batteries:
If the combination unit cannot be operated properly with
the remote control or does not work at all, the batteries
must be replaced.
Depending on the type of television, there are different
possibilities of connecting the combination unit to it:
Connecting to a television by means of
a scart cable/RGB
Always replace both batteries, in order to be able to use
the remote control at full capacity again.
Note:
Note:
The best quality connection is achieved by connecting the
combination unit to the television by means of a scart ca-
ble via the RGB input. Choose this connection variant if the
television has an RGB input. If you are not sure, check this
by looking at the operating instructions of the television.
Used batteries may not be disposed of in household
waste. Throw away used batteries at a waste collection or
disposal point or there, where you bought the batteries.
If you should want to dispose of the remote control of
the combination unit itself, then you have to remove the To connect the combination unit to a television by means
batteries beforehand!
of a scart cable:
Note
1
2
3
Plug the supplied scart cable into the scart jack of the
combination unit.
To guarantee that the remote control works perfectly:
Plug the other end of the scart cable into the scart jack
of the television.
•
•
Always point the remote control at the combination
unit
Set the television to RGB mode in the AV channel. If
you are not sure how to carry out this setting, then
consult the operating instructions of the television.
Ensure that there are no obstacles between the re-
mote control and the combination unit, which pre-
vent reception
Also look at the chapter “Setting video output” for more
information on this subject.
•
Do not move more than 5 meters away from the
combination unit when using the remote control
Otherwise disturbances can arise when operating the
combination unit with the remote control.
11
KH 2370
Connecting to a television
by means of S-Video
1
2
3
4
5
6
7
Plug in the supplied cinch cable into the video jack of
the combination unit.
Note:
Plug in the other end of the cinch cable into the corre-
sponding cinch jack of the television.
For this connection variant, the television must have an
S-Video input and two unassigned cinch jacks.
Plug in one cinch cable into the AUX IN L cinch jack of
the combination unit.
If you are not sure whether
Plug in the other end of the cinch cable into the audio
jacks for the left channel on the television.
•
the television can use S-Video, then consult the operat-
ing instructions of the television
Plug in another cinch cable into the AUX IN R cinch
jack of the combination unit.
•
it has unassigned cinch jacks, then check this on the
back of the television
Plug in the other end of this cinch cable into the audio
jacks for the right channel on the television.
To connect the combination unit by means of S-Video to
the television:
Check the operating instructions whether any other
possible settings are necessary on the television.
1
2
3
4
5
6
7
Plug in the S-Video cable into the jacks labelled S-Vid-
eo of the combination unit.
Connecting the antenna to the
combination unit:
Plug in the other end of the S-Video cable in the S-Vid-
eo jacks of the television.
To pick up radio stations the combination unit has
Plug in one cinch cable into the AUX IN L cinch jack of
the combination unit.
•
a dipole antenna for very high frequency (VHF/FM)
broadcasting stations, which is firmly mounted on the
back of the combination unit and
Plug in the other end of the cinch cable into the audio
jack for the left channel on the television.
•
a loop antenna for medium wave (AM) broadcasting
stations, which is part of the scope of supply. First of all
you have to connect this antenna to the combination
unit.
Plug in another cinch cable into the AUX IN R cinch
jack of the combination unit.
Plug in the other end of this cinch cable into the audio
jack for the right channel on the television.
1
2
Lift the stand of the loop antenna, which has been
folded inside, to the outside.
Set the television to the AV channel, which reproduc-
es the S-Video signal. If you are not sure how to carry
out these settings, then consult the operating instruc-
tions of the television. In addition, check the operating
instructions to see whether you have to carry out any
further settings on the television.
Lock the plastic clips on the loop antenna into the slits
on the stand. If you can hear that the plastic clips have
locked into the slit, this means that the loop antenna
has to be upright.
3
Turn the combination unit around. On the back you
will find a black double terminal labelled AM. Insert
one lead of the antenna cables into each of the termi-
nals. The medium wave antenna is now operational.
Also look at the chapter “Setting video output” for more
information on this subject.
Connecting to a television by means of
video input (composite video)
Connect the headphones to the
combination unit
If you would like to connect the combination unit to a tel-
evision, which
Plug in the jack plug of the headphones into the head-
phones jack PHONES of the combination unit.
•
is not capable of using S-Video and
Connecting to digital audio components
•
does not have a scart jack, but has cinch jacks
If you have a Dolby Digital or DTS amplifier, then you can
connect the combination unit to it. To do this, you need
then connect it by means of the video input (the so-called
“composite video”–connection variant). To do this:
12
KH 2370
a coaxial cable which can be bought in specialised audio
equipment shops.
•
•
•
the cable of the center loudspeaker into the terminal
marked Center
1
2
Plug in the coaxial cable into the COAXIAL jack of the
combination unit.
the cable of the rear right loudspeaker into the termi-
nal marked Rear R
Plug in the other end of the coaxial cables into the cor-
responding jack on the Dolby Digital/DTS amplifier.
the cable of the rear left loudspeaker into the terminal
marked Rear L
Connect the surround loudspeakers and
subwoofer to the combination unit
4
To connect the subwoofer: Plug in the supplied cinch
cable into the SUBWOOFER cinch jack of the combina-
tion unit.
The supplied surround loudspeakers are connected to the
combination unit by means of the supplied loudspeaker ca- Positioning the surround loudspeakers
bles. Use the three shorter loudspeaker cables to connect
To provide an optimal sound, the loudspeakers should be
•
the center loudspeaker and
positioned as follows:
•
the front right and left surround loudspeakers
•
Front right and left surround loudspeakers on the right
and left of the television
to the combination unit. Use both the long loudspeaker
cables to connect
•
Center loudspeaker in the middle between the front
left and right surround loudspeakers
•
the rear right and left surround loudspeakers
•
•
Rear right and left surround loudspeakers on the right
and left behind your listening position
to the combination unit. The subwoofer is connected to
the combination unit by means of one of the supplied
cinch cables.
The installation location of the subwoofer is optional,
as the human ear cannot locate the low tones of the
subwoofer.
The supplied surround loudspeakers are identical. You can,
e. g., use each of the loudspeakers as center loudspeaker,
front or rear surround loudspeaker.
Initial operation of the
combination unit
1
To connect the surround loudspeakers, insert each
•
end of the red leads of the loudspeaker cable into the
red terminal and
In order to be able to carry out the following settings be-
fore using the combination unit for the first time:
•
end of the black leads of the loudspeaker cable into
the black terminals
1
2
3
4
5
Insert the power cord of the combination unit into a
power socket.
on the back of the loudspeaker.
Then insert
2
Insert the power cord of the subwoofer into a power
socket.
•
the end of the red leads of the loudspeaker cable into
the red terminal and
Press the POWER button to switch on the combination
unit.
•
the end of the black leads of the loudspeaker cable
into the black terminal
Switch the power switch on the back of the subwoofer
to ON.
on the back of the combination unit. Insert the individ-
ual loudspeaker cables into the following terminals:
Press the POWER button on the front of the subwoofer
to switch it on.
•
•
the cable of the front right loudspeaker into the termi-
nal marked Front R
Operating the OSD menu
the cable of the front left loudspeaker into the terminal Most of the settings on the combination unit are carried
marked Front L
out by means of the so-called on screen display menu
13
KH 2370
(abbr. OSD menu). The OSD menu appears on the televi-
sion screen. It is very easy to operate the OSD menu:
•
on the left side, the list of subitems of the selected
main menu item. Each selected subitem will be high-
lighted.
•
Select the individual settings with the up, down, right
and left control buttons.
•
on the right side, the list of the options for the selected
subitem. Each selected option will be highlighted.
•
Confirm the corresponding selection with the ENTER
button.
Example: You have selected the main menu item GEN-
ERAL SETUP. If you press the ENTER button, the follow-
ing will be displayed:
To be able to carry out the necessary settings by means of
the OSD menu:
GENERAL PAGE
Press the POWER button to switch on the combination
unit. First of all READING will flash on the front of the com-
bination unit, then NO DISC will be displayed. The follow-
ing will be shown on the television screen:
TV Display
OSD Lang
Scr Saver
Normal/PS
Normal/LB
Wide
Main Page
4
5
6
To choose between the selected subitem options,
press the right control button. You are now in the list of
options for the selected subitem.
You can select an option with the up and down control
buttons. Confirm your selection by pressing the ENTER
button.
Press the left control button to change back to the list
of the subitems.
Familiarize yourself with the operation of the OSD menu
by carrying out the following brief instructions:
7
Now you can
1
To call up the OSD menu of the combination unit,
press the SETUP button on the remote control.
•
select another subitem with the up/down control but-
tons or
The main menu with the menu items now appears on
the television screen:
•
return to the main menu. Choose the main page of the
subitem by using the control buttons. Then press the
ENTER button.
SETUP MENU
MAIN PAGE
General Setup
Speaker Setup
Audio Setup
Preferences
8
To exit the OSD menu, select the menu item Exit Setup
using the control buttons. Then press the ENTER but-
ton; the OSD menu is hidden.
Necessary settings to the combination
unit before initial use
Exit setup
2
You can select the individual main menu items with
the up and down control buttons on the remote con-
trol. The selected main menu item is highlighted.
Before the initial use of the combination unit, you must
carry out some settings by means of the OSD menu. To be
able to do so
Note:
•
•
the combination unit and
You cannot select the main menu item PREFERENCES
when a disc is being played back. To be able to select
PREFERENCES you first have to stop the playback. Press
the STOP button twice.
the television, to which it is connected,
have to be ready for operation and switched on.
1
Call up the OSD menu, by pressing the
SETUP button. The OSD menu will be shown with its
menu items:
3
To display the subitems to a main menu item, press the
ENTER button. The following will now be displayed:
14
KH 2370
SETUP MENU
MAIN PAGE
back in PAL format. Only use the PAL setting if you have
connected the combination unit to a PAL television.
General Setup
Speaker Setup
Audio Setup
Preferences
Note:
The correct setting depends on the television, to which
you have connected the combination unit. Your televi-
sion – as long as it was not bought abroad – will mostly
correspond to the normal television standard in your
country. If you are not sure which television standard is
used in your country, then check this by referring to the
operating instructions of your television.
Exit setup
2
Select the main menu item PREFERENCES with the
down control button. Confirm your selection with the
ENTER button. The subitems of the main menu item
PREFERENCES are displayed:
Also look at the chapter “Glossary/Index” for more infor-
mation on this subject.
Preferences Page
TV-Type
Video Output
Audio
Multi
NTSC
PAL
3
Return to the list of the subitems.
Setting video output
Subtitle
Disc-Menu
Parental
Password
Defaults
1
Select the subitem VIDEO OUTPUT using the control
buttons. Change back to the list of options for this
subitem.
2
Choose between the options using the control buttons:
Set television standard
S-VIDEO
1
The subitem TV-TYPE is the first to be automatically se-
lected. Change to the options list of this subitem using
the control buttons.
Select S-Video, if the combination unit is connected to the
television by means of an S-Video cable.
RGB
2
Choose between the options using the control buttons:
Select RGB, if the combination unit is connected to the tel-
evision by means of a scart cable.
MULTI
This setting automatically selects the standard with which
the DVD/VCD/S-VCD was recorded. Only use the MULTI
setting, if the combination unit is connected to a multi-
standard television.
Note:
If you have selected the composite video connection var-
iant, it does not matter which setting you have chosen.
NTSC
3
Return to the list of the subitems.
DVDs/VCDs/S-VCDs, which have been recorded with the
NTSC standard, are played back with this setting.
Setting playback language
1
Select the subitem AUDIO using the control buttons.
Change to the options list of this subitem.
DVDs/VCDs/S-VCDs, which have been recorded with the
PAL standard, are converted automatically so as to play
back in NTSC format. Only use the NTSC setting, if you
have connected the combination unit to a NTSC televi-
sion.
Here you can set the language, in which the contents
of DVDs/VCDs/S-VCDs are played back.
2
Select one of the languages displayed using the con-
trol buttons.
PAL
This setting plays back DVDs/VCDs/S-VCDs, which have
been recorded with the PAL standard.
Note:
DVD/VCD/S-VCD contents are only played back in the
selected language if it is available on the DVD/VCD/
S-VCD. If it is not available, then the contents will be
DVDs/VCDs/S-VCDs, which have been recorded with the
NTSC standard, are converted automatically, so as to play
15
KH 2370
played back in a language which is on the DVD/VCD/S-
VCD. You can mostly find information on which playback
language is available on the DVD-/VCD-/S-VCD cover.
Switching on/off disc navigation menu
The playback functions of CD-Rs/CD-RWs with MP3 and
JPEG files can be operated either
Also look at the chapter “Changing playback language”
for more information on this subject.
•
exclusively by means of the buttons of the remote con-
trol or
3
Return to the list of the subitems.
•
by means of the so-called SMART NAVI menu
Setting subtitle language
However the SMART NAVI menu offers you more playback
functions. The SMART NAVI menu is shown on the televi-
sion screen. It is operated in a similar manner as that of the
OSD menu. To display the SMART NAVI menu automatical-
ly if CD-Rs/CD-RWs with MP3/ JPEG files are inserted:
1
Select the subitem SUBTITLE using the control buttons.
Change to the options list for this subitem.
2
Select one of the displayed languages or OFF using the
control buttons. If you select OFF, no subtitles will be
shown when playing back a DVD/VCD/S-VCD.
1
2
Select the subitem SMART NAV using the control but-
tons. Change to the list of options for this subitem.
Note:
Select the option WITH MENU using the control but-
tons. If you would like to operate the playback func-
tions of CD-Rs/CD-RWs with MP3/JPEG files without
SMART NAVI menu: Select the option NO MENU.
Subtitles will be shown only in the selected language, if
it is available on the DVD/VCD/S-VCD. If it is not avail-
able, then the subtitles will be played back in one of the
languages available on the DVD/VCD/S-VCD. Mostly
you can find information on which playback language is
available on the DVD-/VCD-/S-VCD cover.
Also look at the chapter “Operating the SMART NAV menu”
for more information on this subject.
3
Return to the list of the subitems.
3
Return to the list of the subitems. Select the subitem
MAIN PAGE using the control buttons to return to the
main menu.
Please also look at the chapter “Showing/hiding subtitles”
for more information on this subject.
General settings
Set the language of the disc menu
Select GENERAL SETUP in the main menu using the con-
trol buttons. Press the ENTER button. The subitems of the
main menu item GENERAL SETUP are displayed:
1
Select the subitem DISC MENU using the control but-
tons. Change to the options list of this subitem.
Here you can set the language, in which the menu for
DVDs/VCDs/S-VCDs – if available – is displayed on the
television screen.
GENERAL PAGE
TV Display
OSD Lang
Scr Saver
Normal/PS
Normal/LB
Wide
Note:
There is not a disc menu on all DVDs/VCDs/S-VCDs. If
there is a disc menu: The disc menu is only displayed in
the selected language, if this is available on the DVD/
VCD/S-VCD. If it is not available, then the disc menu will
be displayed in one of the languages available on the
DVD/VCD/S-VCD. The available languages can be select-
ed mostly, however, also in the disc menu itself.
Main Page
Set picture format
1
Select the subitem TV DISPLAY using the control but-
tons. Here you can set the picture format for the televi-
sion, which is connected to the combination unit.
Also look at the chapter “Calling up DVD menu” for more
information on this subject.
2
Select a suitable picture format in the list of options us-
ing the control buttons:
2
3
Select one of the displayed languages using the con-
trol buttons.
Note:
The correct setting depends on the television to which
you would like to connect the combination unit. If you
are not sure which picture format is possible with your
Return to the list of subitems.
16
KH 2370
television, then check this by referring to the operating
instructions of your television.
•
the OSD menu is displayed for a longer period of
time on the television screen and
NORMAL/PS
•
at the same time no buttons are pressed on the re-
mote control/on the front of the combination unit.
Picture format 4:3 Pan & Scan; when playing films with for-
mat 16:9, the left and right part of the picture are cut off.
This means that the height of the screen is utilized as far as
possible.
2
3
Select between ON and OFF in the list of options using
the control buttons.
Return to the list of subitems. Select the subitem MAIN
PAGE using the control buttons, to return to the main
menu.
NORMAL/LB
Picture format 4:3; when playing films with format 16:9,
black bars can be seen on the upper and lower part of the
picture.
Loudspeaker settings
The subsequent settings apply to the sound reproduc-
tion by means of the surround loudspeakers and the sub-
woofer of the combination unit. If you would like to use
an external audio component for the sound reproduction
then you have to carry out the settings on this component.
Check the operating instructions to find out how to carry
out these settings on the audio component.
WIDE
Wide screen format16:9; when playing films with format
16:9 with 16:9 (1.78:1) wide screen televisions, the picture
appears without black bars on the upper and lower parts
of the picture and without the right and left part of the
picture being cut off.
In order to get an optimal sound, it is necessary to adjust
the sound reproduction to
3
Return to the list of the subitems.
Setting the language of the OSD menus
•
the conditions at the installation location of the combi-
nation unit and
1
Select the subitem OSD LANG using the control buttons.
•
your personal preferences
Here you can set the language in which the OSD menu
is displayed.
To do this:
1
Select the menu item SPEAKER SETUP in the main
menu. In the menu SPEAKER SETUP, the following is
displayed:
GENERAL PAGE
TV Display
OSD Lang
Scr Saver
English
French
SPEAKER SETUP
German
Italian
Downmix
Center
Stereo
OFF
Portuguese
Spanish
Rear
Subwoofer
Cntr Delay
Rear Delay
Test Tone
Main page
2
3
Select the requested language in the list of options us-
ing the control buttons.
2
Select the subitems in the list one after the other:
Return to the list of subitems.
DOWNMIX
Switch on the screensaver
Select the option STEREO, if you
1
Select the subitem SCR SAVER using the control buttons.
•
have connected the combination unit to a stereo tel-
evision and
Info:
The screensaver prevents a picture, which has been dis-
played for a long time, from being burned into the tel-
evision screen. If the screensaver is switched on, this will
automatically be shown as soon as
•
would not like to use the surround loudspeakers for
the sound reproduction or
17
KH 2370
•
have connected a digital audio component by means
of the stereo output (using the cinch cable to the cinch
jacks AUX IN R and L) to the combination unit.
TEST TONE
Choose between the ON and OFF options. When the test
sound is switched on, you will hear a hissing sound com-
ing one after the other from all connected loudspeakers.
With this sound you can test, whether
The sound reproduction then only comes from two chan-
nels (Stereo). This is called stereo downmix. Otherwise
you will not be able to hear the sound or only very
softly when playing back DVDs/VCDs/S-VCDs, audio
and MP3 CDs!
•
all loudspeakers are correctly connected to the combi-
nation unit and
Select OFF, if none of the named reasons for switching on
the stereo downmix apply.
•
you have the optimal delay setting for the rear and the
center loudspeakers.
CENTER
3
Return to the list of the subitems. Select the subitem
MAIN PAGE using the control buttons to return to the
main menu. Exit the OSD menu, by selecting the menu
item EXIT SETUP.
To play back 5.1 channel surround sound, select the ON
option. If you would like to switch off the center loud-
speaker, select the OFF option.
Set the volume level of the surround
loudspeakers
REAR
To play back 5.1 channel surround sound, select the ON
option. If you would like to switch off the rear right and
left loudspeaker, select the OFF option.
You can set the volume level for each surround loudspeak-
er and also the subwoofer individually. To do this:
1
Press the STEREO/ST button when the combination
unit is switched on. FL +6 will appear in the display of
the combination unit for the front left surround loud-
speaker.
Subwoofer
To play back 5.1 channel surround sound, select the ON
option. If you would not like to have any bass enhance-
ment by the subwoofer, select the AUS option.
2
3
Select a volume value between +6 and -6 dB with the
up/down control buttons.
CNTR DELAY
Subsequently select the other surround loudspeakers
with the left/right control buttons. The following will
be displayed:
Here you can set the delay with which the sound of the
center loudspeaker reaches your listening position. If the
settings have been carried out optimally, the sound from
all loudspeakers will reach your listening position at the
same time.
•
•
CT +6 for the center loudspeaker
FR +6 for the front right surround loudspeaker
RL +6 for the back left surround loudspeaker
RR +6 for the rear right surround loudspeaker
The correct value depends on the distance of the center
loudspeaker from your listening position. Three millisec-
onds delay correspond to a distance of around one meter.
Set a delay between one and five milliseconds with the up
and down control buttons.
•
•
4
Select the required volume for each loudspeaker with
the up/down control buttons.
REAR DELAY
Here you can set the delay with which the rear loudspeak-
er arrives at your listening position. If the settings have
been carried out optimally, the sound from all loudspeak-
ers will reach your listening position at the same time.
Note:
If you are not sure which value is the correct one: Carry
out this setting from your listening position while playing
back a DVD/VCD/S-VCD. Try all the different settings until
you have found a sound which you consider optimal.
The correct value depends on the distance of the rear
loudspeaker from your listening position. Three millisec-
onds delay correspond to a distance of around one meter.
Set a delay between one and fifteen milliseconds with the
up and down control buttons.
5
To save the settings, press the STEREO/ST button once
more. The loudspeaker settings have now been com-
pleted.
18
KH 2370
Other audio settings
•
the L-MONO option: You hear the first language on the
front left and right loudspeakers.
Press the“Setup”button to display the OSD menu. Select
the menu item AUDIO SETUP in the main menu. The fol-
lowing is displayed in the menu AUDIO SETUP:
•
the R-MONO option: You hear the second language on
the front left and right loudspeakers.
AUDIO SETUP
•
the MIX-MONO option: You hear both languages one
on the front left and one on the front right loudspeaker.
Audio Out
OP Mode
Dual Mono
Dynamic
Analog
SPDIF/Raw
SPDIF/PCM
3
Return to the list of the subitems.
Dynamic range compression/Set
midnight mode
LPCM Output
Main page
1
Select the subitem DYNAMIC using the control buttons.
Here you can set the so-called midnight mode to play
back DVDs with 5.1 channel surround sound. This mode
can be useful if e. g. you would like to play back a DVD dur-
ing the night.
Setting audio output
1
Select the subitem AUDIO OUTPUT using the control
buttons.
Explanation: If you lower the playback volume with the
volume buttons/volume control then all 6 audio channels
are affected. Both background noises and also music and
dialogue become quieter in equal measures. By contrast,
in the case of midnight mode, only the playback volume
of background noises, music etc. becomes quieter. The
dialogues can therefore be heard very well even with a
lower playback volume.
2
Select the option
•
ANALOG, if you have not connected any digital audio
components to the combination unit.
•
SPDIF/RAW, if you have connected a multi-channel
digital audio component – e. g. a Dolby Digital or DTS
receiver – by means of a coaxial cable to the combina-
tion unit.
2
3
Set a value between OFF and FULL using the control
buttons.
•
SPDIF/PCM, if you have connected a two-channel digit-
al audio component by means of a coaxial cable to the
combination unit.
Return to the list of subitems. Select the subitem MAIN
PAGE, to return to the main menu.
3
Return to the list of subitems.
Using the combination
unit
Settings for mono VCDs/S-VCDs
Note
This subitem is only relevant when playing back VCDs/S-
VCDs. The sound on VCDs/S-VCDs can be available in
After you have
•
set up the combination unit in a suitable location
•
•
monolingual in stereo or
bilingual in mono.
•
have connected the combination unit to a television
with one of the described connection options
1
Select the subitem DUAL MONO using the control but-
tons.
•
•
•
positioned the surround loudspeakers and the sub-
woofer and connected them to the combination unit
2
For mono VCDs/S-VCDs select
know, how one calls up and operates the OSD menu
with the remote control and
•
the STEREO option: You hear the first language on the
front left and the second language on the front right
loudspeaker.
have connected and switched on the combination unit
and the subwoofer to the power supply
you can start using the combination unit.
19
KH 2370
7
To save the new input time, press the CLK ADJ button
again.
General functions of the combination
unit
Using the timer
Setting playback volume
The combination unit can switch itself on automatically at
a fixed time with the timer function. You can select wheth-
er an audio CD should be played back or the radio should
be switched on.
Press the Vol + button to increase the playback volume. To
decrease the playback volume press the Vol – button.
The change in the volume between MIN (sound off) and
MAX (maximum volume) will be shown in the display.
Note:
Switching the playback sound to mute
(Mute)
If you would like to use the timer function to switch on
the radio, then the radio station must be saved.
To switch the playback sound to mute, press the
but-
Look at the chapter “Radio mode” for more information on
this subject.
ton while playing back DVDs, VCDs/S-VCDs, audio CDs as
well as CD-Rs/CD-RWs with MP3 files. If you would like to
switch the playback sound back on, then press the button
once more.
For the timer function to work properly, the time in the
display of the combination unit has to be set correctly.
Check this and, if necessary, set the correct time. To switch
on the timer function:
Equalizer functions
The combination unit has a five-step equalizer function.
With this function you can, in addition, adjust the sound
playback to suit your personal hearing preferences. To
switch on the equalizer function, press the PRE-EQ button.
1
If a disc is being played back: First of all stop playback
by pressing twice on the STOP button.
To switch on the audio CD playback:
Every time you press the PRE-EQ button, you switch on
one of the equalizer settings JAZZ, ROCK, CLASSIC, POP
and FLAT. Each of these settings has its own characteris-
tic emphasis of high, medium and low tones (basses). The
equalizer setting at any one time appears in the display of
the combination unit.
2
3
Put the audio CD, which you would like to play back
with the timer function, into the combination unit.
Press the CD/DVD button, if you would like to switch
on the audio CD playback with the timer function. Go
directly to step 4 and continue reading.
Setting the clock
To switch on the radio:
To set the time display shown on the display of the combi-
nation unit:
2
3
Press the TUNER/BAND button.
Now select the radio station which should be switched
on with the timer function. To do this, use the PAUSE/
MEM UP and REPEAT/MEM DN buttons on the combi-
nation unit. The memory slot of the selected radio sta-
tion and its frequency will be shown in the display of
the combination unit.
1
2
3
4
If a disc is being played back: First of all stop the play-
back by pressing the STOP button twice.
Press the MODE button once. The currently input time
will be shown in the display of the combination unit.
Press the CLK ADJ button once. The first two digits of
the time display now flash.
4
5
Press the TIMER button.
Press the MODE button twice. The input time and TIM-
ER ON will be shown in the display.
Set the first two digits of the time display to between
00 and 23. Use the SKIP forwards and SKIP backwards
button to do this.
6
7
Now set the time at which the timer function should
switch on the combination unit. Press the CLK ADJ but-
ton once. The first two digits of the time display now
flash.
5
6
Subsequently press the CLK ADJ button. The last two
digits of the time display now flash.
Set the last two digits of the time display to between
00 and 59. Use the SKIP forwards and SKIP backwards
button to do this.
Set the first two digits of the time display to between
00 and 23. Use the SKIP forwards and SKIP backwards
buttons to do this.
20
KH 2370
2
Nine different time steps can be set to switch off the
combination unit. Keep the SLEEP button pressed to
switch through the available time steps one after the
other. The time steps are: 90, 80, 70, 60, 50, 40, 30, 20
and 10 minutes.
8
9
Press the CLK ADJ button again. The last two digits of
the time display now flash.
Set the last two digits of the time display to between
00 and 59. Use the SKIP forwards and the SKIP back-
wards buttons to do this.
3
4
Let the SLEEP button go as soon as the required time
step appears in the display.
10 To save the input time press the CLK ADJ button again.
Wait until the display returns to the normal playback
mode. Now SLEEP appears in the display. The sleep
timer function is now switched on.
11 Press the MODE button once more. TIMER OFF appears
in the display
12 Now set the time at which the timer function should
switch off the combination unit. To do this, press the
CLK ADJ button once. The first two digits of the time
display now flash.
5
To switch off the sleep timer function, press the SLEEP
button once more. SLEEP will no longer appear in the
display.
Childproof protection
13 Set the first two digits of the time display to between
00 and 23. To do this use the
Many DVDs and VCDs/S-VCDs are provided with a movie
rating. The movie rating states for which age group the
contents of the DVD/VCD/S-VCD are intended. The respec-
tive movie rating level is mostly printed on the disc cover
and/or on the DVD/VCD/S-VCD itself.
SKIP forwards and SKIP backwards buttons.
14 Press the CLK ADJ button again. The last two digits of
the time display now flash.
15 Set the last two digits of the time display to between
00 and 59. Use the SKIP forwards and SKIP backwards
buttons to do this.
The combination unit has multi-level childproof protec-
tion. This prevents the playback of DVDs/VCDs/S-VCDs,
which are not approved for the input age level.
16 To save the input time, press the CLK ADJ button again. Switch on the childproof protection
17 Press the MODE button.
1
2
3
If a disc is being played back: First of all stop the play-
back by pressing twice on the STOP button.
18 Then press the CLK ADJ button once more. DVD/CD
flashes in the display.
Press the SETUP button to display the OSD menu on
the television screen.
19 To switch on the audio CD playback: Go directly to
step 20 and continue reading.
Choose the main menu item PREFERENCES using the
control buttons. Then press the ENTER button.
To switch on the radio: Press the SKIP forwards button
until TUNER flashes in the display.
4
5
Select PARENTAL in the list of the subitems.
20 Press the MODE button to complete the setup of the
Change to the options list with the right hand control
button.
timer function.
21 Press the POWER button. The timer function is now
switched on. The combination unit will switch the au-
dio CD playback/the radio on and off respectively at
the input times.
6
Select between the options using the control buttons:
G
No DVDs/VCDs/S-VCDs with age restrictions/movie rat-
ings over 0 years old can be played back.
Using the sleep timer
The combination unit can switch itself off automatically af- PG
ter a fixed time with the sleep timer function. To switch on
the sleep timer function:
NO DVDs/VCDs/S-VCDs with age restrictions/movie rat-
ings over 0 years old can be played back, apart from those
which are recommended for parental guidance.
1
Press the SLEEP button once during playback. 90
shows up in the display and SLEEP flashes.
21
KH 2370
PG-
Selecting your own password
No DVDs/VCDs/S-VCDs with a movie rating below 13 years You can replace the password 3308, which has been set by
old can be played back.
the factory, with a four-digit password with digits from 0
to 9, which you can choose yourself. To do this:
PG-R
1
If a disc has been inserted into the combination unit
and is being played back at the moment, then stop the
playback by pressing the STOP button twice.
No DVDs/VCDs/S-VCDs with a movie rating below 17 years
old can be played back, apart from those which are stipu-
lated for parental guidance.
2
3
Press the SETUP button to display the OSD menu on
the television screen.
NC-
No DVDs/VCDs/S-VCDs with a movie rating below 17 years
old may be played back.
Select the main menu item PREFERENCES using the
control buttons. Then press the ENTER key.
ADULT
4
5
Select PASSWORD in the list of the subitems.
All DVDs/VCDs/S-VCDs, even those with a movie rating
over 18 years old/for adults can be played back.
Change to the only option CHANGE with the right con-
trol button.
7
Press the ENTER button to confirm your selection. The
following is shown on the television screen:
6
Press the ENTER button. The following is shown on the
television screen:
PASSWORD VERIFY PAGE
INPUT PASSWORD
PASSWORD CHANGE PAGE
OLD PASSWORD
NEW PASSWORD
8
9
Enter the password 3308 set by the factory with the
number buttons 0 to 9. Confirm your entry by pressing
the ENTER button.
CONFIRM PWD
7
8
9
Firstly, the input field behind OLD PASSWORD is auto-
matically selected. Enter the password 3308, which has
been set by the factory, with the number buttons 0 to 9.
The input movie rating has now been saved. Return to
the list of the subitems.
The marking changes automatically to the input field
behind NEW PASSWORD Enter your new password
with the number buttons 0 to 9.
Note:
The exact function of the childproof protection depends
on the individual DVD/VCD/S-VCD. On some DVDs/
VCDs/S-VCDs, playback is not at all possible; on others,
unsuitable chapters are skipped or replaced by others
for the relevant movie rating level.
The marking changes automatically to the input field
behind CONFIRM PWD Enter your new password again
with the number buttons 0 to 9.
10 Press the ENTER button. The list of subitems for the
main menu item PREFERENCES is shown on the televi-
sion screen. Your new password has now been activated.
Please note, in addition, that
•
•
DVDs/VCDs/S-VCDs, which do not have a movie rat-
ing printed on them, could still have a movie rating
and
Setting back the combination unit to
the settings made in the factory
on some DVDs/VCDs/S-VCDs with a movie rating
printed on them, the childproof protection shows no
function with the input movie rating level.
Note:
Before setting the unit back to the settings made in the
factory: Take into consideration that by setting the val-
ues back, each of your settings in the OSD menu will be
lost.
10 Select MAIN PAGE in the list of subitems. Press the EN-
TER button to return to the main menu.
11 Select the main menu item EXIT SETUP using the con-
trol buttons. Press the ENTER button to exit the OSD
menu.
To undo all your settings in the OSD menu:
1
If a disc has been inserted into the combination unit
and is being played back at the moment, then first
22
KH 2370
of all stop the playback by pressing the STOP button
twice.
6
00 flashes in the display. Select a memory slot for the
radio station with the number buttons 0 to 9.
2
3
Press the SETUP button to display the OSD menu on
the television screen.
You can enter a memory slot number between 1 and
40. Two-digit memory slot numbers can be entered
with the 10+ button and the number buttons 0 to 9.
Select the main menu item PREFERENCES using the
control buttons. Then press the ENTER button.
Example: If you would like to select the memory slot
number 21, press twice on the 10+ button. Then press
the number button 1.
4
5
Select DEFAULTS in the list of the subitems.
Change to the only option RESET with the right control
button.
7
Repeat the steps 4 to 6 to save other radio stations.
To pick up radio stations:
6
Press the ENTER button. The combination unit will now
be set back to the settings made in the factory.
1
2
Switch on the combination unit with the POWER button.
Switching off the combination unit
Press the TUNER/BAND button to change the combina-
tion unit to radio mode.
To switch off the combination unit
3
Press the TUNER/BAND button again to select the AM
band (medium wave). Press the TUNER/BAND button
once more to select the FM band (very high frequency).
1
2
If a disc which has been inserted into the combination
unit is being played back, first of all stop the playback
by pressing the STOP button twice.
4
To call up a saved radio station:
Open the disc tray to remove any disc inserted into the
combination unit by pressing the OPEN/CLOSE button.
Then close the disc tray by pressing the OPEN/CLOSE
button once more.
•
With the radio section switched on, press the number
button corresponding to the memory slot number or
•
Use the PAUSE/MEM UP or REPEAT/MEM DN buttons
to switch through the memory slot numbers one after
the other.
3
To switch off the combination unit, press the POWER
button.
Improving the reception of FM/very
high frequency radio stations
Radio mode
To improve the reception of radio stations in the FM/VHF
band: Unwind the dipole antenna on the back of the com-
bination unit to its full length. Hold the end of the dipole
To switch on the radio section of the combination unit:
1
2
Switch on the combination unit with the POWER button. antenna slowly in different directions. Once you have
found a good reception for the input radio station in this
Press the TUNER/BAND button to change the combina-
tion unit to radio mode.
manner: Fix the dipole antenna in this position, e. g. with a
piece of adhesive tape.
3
Press the TUNER/BAND button again to select the AM
band (medium wave).
Improving the reception of AM/medium
wave radio stations
Press the TUNER/BAND button once more to select the
FM band (very high frequency).
To improve the reception of radio stations in the AM/
medium wave band: Turn the loop antenna connected to
the combination unit slowly in different directions. Once
you have found a good reception for the input radio station
in this manner: Set up the loop antenna in this position.
4
Use the SKIP forwards and SKIP backwards buttons to
set a radio station in the selected band.
Saving radio station
To save a previously selected radio station:
5
Press the MEMORY button.
23
KH 2370
•
to select the language for the subtitles and film sound
the direct selection of chapters
DVD/VCD/S-VCD mode
•
Playing back DVDs, VCDs or S-VCDs
•
the playback of bonus material on the film (back-
ground information, making of etc.)
To play back a DVD/VCD/S-VCD with the combination unit:
If a disc menu appears on the television screen:
1
Ensure that you
1
Select the menu item using the control buttons with
which the playback of the DVD/VCD/S-VCD contents is
started.
•
have connected the combination unit properly to the
television and
•
all necessary settings have been carried out in the OSD
menu of the combination unit.
2
Then press the ENTER button to start the playback.
Also look at chapter “Calling up disc menu” for more infor-
mation on this subject.
2
Switch on the television to which the combination unit
is connected.
Functions when playing back a DVD,
3
4
Switch on the combination unit with the POWER button. VCD or S-VCD
Open the tray of the combination unit with the OPEN/
CLOSE button.
Note:
The functions described below are perhaps not avail-
able on all DVDs/VCDs/S-VCDs! If you try to carry out
functions which are not available, it is displayed on
the television screen.
5
Insert a DVD/VCD/S-VCD into the disc tray with the la-
belled side upwards.
Note:
During the playback of a DVD/VCD/S-VCD, you can use the
following functions of the combination unit:
DVDs, VCDs and S-VCDs, which you would like to play
back with the combination unit, possibly have a country
code which is printed on the DVD cover.
To pause playback (Pause)
The combination unit can only play back DVDs/VCDs/S-
VCDs with the country code 2.
To pause the playback of the inserted DVD/VCD/S-VCD:
1
2
During the playback press the PAUSE button. On the
television screen you can see the fixed image of the
scene which has just been paused.
If there is no country code printed on the cover of a
DVD/VCD/S-VCD
•
•
but instead the symbol , then the DVD/VCD/S-VCD
can be played back with the combination unit
To continue the playback, press the PLAY button.
Stopping the playback (Stop)
then the DVD/VCD/S-VCD can possibly not be played
back by the combination unit. Check this by trying to
play back the DVD.
To stop the playback of the inserted DVD/VCD/S-VCD,
press the STOP button.
6
Close the disc tray by pressing the OPEN/CLOSE but-
ton.
Playback stop with resume function
The combination unit automatically saves the position at
which the playback was stopped. This function is called
resume function. If you press the PLAY button once more,
then the playback will continue at the saved position.
7
8
The contents of the inserted DVD/VCD/S-VCD is now
being loaded; this can last for several seconds.
The playback of the inserted DVD/VCD/S-VCD starts
automatically.
Playback stop without resume function
Depending on the inserted DVD/VCD/S-VCD, it is possible
that the contents are not played back immediately, as first
of all a disc menu appears on the television screen. The
disc menu allows you e. g.
The saved position is deleted if you press the STOP button
a second time. If you press the
PLAY button once more, then the playback starts at the
beginning of the inserted DVD/VCD/S-VCD.
24
KH 2370
•
•
•
once for double slow motion forward playback. SF 2x is
displayed on the television screen.
Calling up disc menu (Menu)
If a disc menu exists on the inserted DVD/VCD/S-VCD:
Press the MENU button during playback to call up the disc
menu. Select the individual menu items using the con-
trol buttons. Press the ENTER button to select the chosen
menu item.
twice for fourfold slow motion forward playback. SF 4x
is displayed on the television screen.
three times for eightfold slow motion forward play-
back. SF 8x is displayed on the television screen.
Rapid search forwards/backwards
•
four times for double slow motion backwards playback.
SR 2x is displayed on the television screen.
To select certain passages within the contents of the DVD/
VCD/S-VCD with rapid search:
•
•
five times for fourfold slow motion backwards play-
back. SR 4x is displayed on the television screen.
1
•
Press the FWD button during playback for rapid search
forwards
six times for eightfold slow motion backwards play-
back. SR 8x is displayed on the television screen.
once for double search speed. FF 2x is displayed on the
television screen.
Note:
•
twice for fourfold search speed. FF 4x is displayed on
the television screen.
During slow motion playback there is no sound.
2
To continue playback at a normal speed, press the
PLAY button.
•
three times for sixfold search speed. FF 6x is displayed
on the television screen.
Frame by frame advance (Step)
•
four times for eightfold search speed. FF 8x is displayed
on the television screen.
You can look through the contents of an inserted DVD/
VCD/S-VCD frame by frame. To do this:
2
•
For rapid search backwards press the RWD key during
playback
1
2
Press the PAUSE button to pause the playback.
once for double search speed. FF 2x is displayed on the
television screen.
Press the STEP button to move one frame forward at a
time.
•
twice for fourfold search speed. FF 4x is displayed on
the television screen.
3
To continue playback press the PLAY button.
Picture enlargement (Zoom)
•
three times for sixfold search speed. FF 6x is displayed
on the television screen.
You can enlarge the picture on the television screen dur-
ing playback in three steps. To do this:
•
four times for eightfold search speed. FF 8x is displayed
on the television screen.
1
Press the ZOOM button on the remote control
Note:
•
once for the first enlargement step. ZOOM x1.5 is dis-
played on the television screen.
There is no sound during the rapid search.
•
•
twice for the second enlargement step. ZOOM x2 is dis-
played on the television screen.
3
To continue playback at a normal speed, press the
PLAY button.
three times for the third enlargement step. ZOOM x3 is
displayed on the television screen.
Slow motion playback forwards/
backwards (Slow)
2
To switch off the enlargement function press the
ZOOM button a fourth time. ZOOM OFF is displayed on
the television screen.
To play back the contents of the inserted DVD/VCD/S-VCD
in slow motion:
1
During playback press the SLOW button
25
KH 2370
Change the angle of the camera (Angle)
•
the amount of time already played back of the chap-
ter currently being played back in hours, seconds and
minutes
Some DVDs/VCDs/S-VCDs contain scenes which can be
recorded at the same time from different camera angles.
You can look at such scenes with the angle function from
different perspectives.
4
If you press the DISPLAY button a fourth time:
•
the time until the end of the chapter currently being
played back in hours, seconds and minutes
To do this, press the ANGLE button during playback.
Each time you press the ANGLE button, it switches over to
one of the available camera angles.
5
To hide the disc information, press the DISPLAY button
once more.
Showing/hiding subtitles
Selecting chapters
If subtitles are available on the inserted DVD/VCD/S-VCD:
What are titles and chapters? Please look at the chapter
1
2
3
Press the SUBTITLE button once, to show the subtitles in “Glossary/Index” for more information on this subject.
the first language available. Press the SUBTITLE button
several times to show the subtitles in other languages.
You can select chapters on an inserted DVD/VCD/S-VCD in
the following ways:
The selected subtitle language and its number is
shown on the television screen (e. g. 01/10: ENGLISH
for the first of ten available subtitle languages).
Skip to the beginning of the chapter
(Skip)
To switch off the display of subtitles: Press the SUBTI-
TLE button again, when the last of the available subti-
tle languages has been shown (e. g. 10/10 for the tenth
of ten available subtitle languages).
With the SKIP forwards and SKIP backwards buttons you
can skip throughout the contents of the DVD/VCD/S-VCD
•
forwards to the beginning of the next chapter or
Changing playback language
•
backwards to the beginning of the chapter currently
being played back
On many DVDs/VCDs/S-VCDs you can select another play-
back language during playback. To do this press the AU-
DIO button.
The selected chapter is played back immediately without
you having to press the PLAY button. The number of the
chapter appears in the display of the combination unit on
the left of the playback time.
When you press the AUDIO once, the first available play-
back language is switched on. Every time you press the
AUDIO button again, other available playback languages
will be switched on one after the other.
Selecting chapters with chapter
numbers
Showing disc information
To select a chapter by entering its chapter number:
You can show all information about a DVD/VCD/S-VCD on
the television screen during the playback. To do this:
1
Press the GOTO button on the remote control during
playback. The GOTO menu is shown on the television
screen:
1
•
Press the DISPLAY button on the remote control. The
following is shown on the television screen:
TITLE 01/03 CHAPTER 001/020
the number of the title and chapter currently being
played back
2
Enter the required chapter number with the number
buttons 0 to 9 in the marked input field.
•
the amount of time already played back of the entire
DVD/VCD/S-VCD content in hours, minutes and seconds
Example: If you would like to select chapter number 3,
then press the number button 3.
2
If you press the DISPLAY button a second time:
Enter two-digit chapter numbers with the 10+ button
and the number buttons 0 to 9.
•
the time until the end of the title currently being
played back, in hours, seconds and minutes
Example: If you would like to select chapter number
21, press the 10+ button twice. Then press the number
button 1.
3
If you press the DISPLAY button a third time:
26
KH 2370
2
Press the A–B button again as soon as the end of the
required sequence is played back. Please note that the
beginning and the end of a sequence must be within
one chapter. A TO B SET B is shown on the television
screen.
3
Press the ENTER button. Playback will be continued at
the beginning of the selected chapter.
Select passages of chapters according
to time positions
The repeated playback of the selected sequence begins
immediately. The sequence is repeated again and again
until the A–B button is pressed again. A TO B CANCELLED
is then shown on the television screen.
To select a passage of a chapter by entering its time posi-
tion on the DVD/VCD/S-VCD:
1
During playback, press the GOTO button on the re-
mote control twice. The GOTO menu is shown on the
television screen:
Audio CD mode
TITLE 01/03 TIME _ _:_ _:_ _
Playing back of audio CDs
2
Enter the time position with the number buttons 0 to 9
in the marked input field.
To play back audio CDs with the combination unit:
Example: To start playback 1 hour, 5 minutes and 30
seconds after the beginning of the DVD/VCD/S-VCD
content: Press the number buttons one after the other
1
2
Open the disc tray of the combination unit with the
OPEN/CLOSE button.
Insert an audio CD with the labelled side upwards in
the disc tray.
•
•
•
0, 1 for 1 hour
0, 5, for 5 minutes
3, 0 for 30 seconds
3
4
Close the disc tray with the OPEN/CLOSE button.
3
Press the ENTER button to start the playback at the se-
lected time position.
The contents of the inserted audio CD is now being
loaded; this can lasts for a few seconds.
Repeat playback
5
As soon as the contents of the inserted audio CD has
been loaded, playback begins automatically.
With the repeat playback function you can repeat alterna-
tively the title or chapter of the inserted DVD.
Functions when playing back audio CDs
1
2
3
To repeat the chapter currently being played back:
During the playback, press the REPEAT button once.
CHAPTER REPEAT ON is shown on the television screen.
During the playback of an audio CD you can use the fol-
lowing functions on the combination unit:
Pause playback (Pause)
To repeat the title currently being played back: During
playback, press the REPEAT button twice. TITLE REPEAT
ON is shown on the television screen.
1
To pause the playback of a title, press the PAUSE but-
ton during playback.
To switch off the repeat playback: Press the REPEAT
button several times until REPEAT OFF is shown on the
television screen.
2
To continue the playback of the title, press the PLAY
button.
Stop playback (Stop)
Repeating sequences
To stop the playback of a title, press the STOP button.
Playback stop with resume function
With this function you can repeatedly play back any se-
quences within the chapter currently being played back.
To do this:
The combination unit automatically saves the position at
which the playback was stopped. This function is called
resume function. IF you press the PLAY button once more,
then the playback will continue at the saved position.
1
Press the A–B button, as soon as the start of the re-
quired sequence is played back. A TO B SET A is shown
on the television screen.
27
KH 2370
Playback stop without resume function
GOTO _ _:_ _
The saved position is deleted if you press the STOP button
a second time. Press the PLAY button once more, then the
playback will begin with the first title of the audio CD.
2
Enter the time position with the number buttons 0 to 9
in the marked input field.
Example: You would like to select a passage, which be-
gins one minute after the beginning of the title. Press
the number buttons one after the other
Select titles
You can select titles on an inserted audio CD in the follow-
ing ways:
•
•
0, 1 for 1 minute;
0, 0 for 0 seconds
Skipping to the beginning of the title
(Skip)
3
The playback continues immediately at the selected
time position.
With the SKIP forwards and SKIP backwards buttons dur-
ing the playback of a title you can skip
Programmed playback
•
forwards to the beginning of the next title or
With this function you can put together selected titles of
an audio CD as a title sequence. You can decide on the
sequence in which the titles are played back. To use the
programmed playback:
•
backwards to the beginning of the title currently being
played back.
The selected title is played back immediately without you
having to press the PLAY button. The number of the title is
shown in the display of the combination unit on the left of
the play back time.
1
If a title is being played back: First of all stop the play-
back by pressing the STOP button twice.
2
3
Press the MEMORY button.
Selecting a title using the number
buttons
Select the first title to be programmed with the
number buttons 0 to 9. This title is now displayed as
the first programmed title on the television screen.
To select a title directly by entering the title number with
the number buttons:
Example: Once you have programmed the fifth title,
PROGRAM 01:05 is displayed.
1
Press the number button on the remote control corre-
sponding to the title number.
Two-digit title numbers are entered with the 10+ but-
ton and the number buttons 0 to 9.
Example: If you would like to select title number 3,
press the number button 3.
Example: If you would like to select title number 21,
press the 10+ button twice. Then press the number
button 1.
Two-digit title numbers are entered with the 10+ but-
ton and the number buttons 0 to 9.
4
5
6
Repeat step 3 until you have programmed all the re-
quired titles.
Example: If you would like to select title number
21, then press the 10+ button twice. Then press the
number button 1.
Press the PLAY button to start the playback of the pro-
grammed titles.
The input numbers are shown on the television screen.
To delete the programmed title sequence: Press the
STOP button. Then press the MEMORY button twice.
2
The playback of the title with the input number now
begins automatically.
Repeat playback
Selecting passages of titles with time
positions
You can repeatedly play back both
To select a certain passage of a title by inputting its time
position:
•
a single title and also
the whole audio CD
•
1
Press the GOTO button during the playback of the title.
The GOTO menu is shown on the television screen:
with this function. To switch on the repeat playback:
28
KH 2370
1
2
3
Press the REPEAT button during playback. REP-ONE is
displayed on the television screen. The title currently
being played back is now repeatedly played back, until
the repeat playback is switched off.
4
5
The contents of the inserted CD-R/CD-RW is now being
loaded; this can last a few seconds.
As soon as the content of the inserted CD-R/CD-RW
has been loaded, it is played back automatically.
Press the REPEAT button a second time. REP-ALL is dis-
played on the television screen. The entire audio CD is
now repeatedly played back until the repeat playback
is switched off.
Functions when playing back
MP3/JPEG files
The following functions are available during the playback
of CD-Rs/CD-RWs with MP3 and JPEG files:
To switch off the repeat playback, press the REPEAT
button a third time. REPEAT OFF is displayed on the tel-
evision screen.
Pause playback (Pause)
Repeating sequences
1
To pause the playback of a file, press the PAUSE button
during playback.
With this function you can repeatedly play back any se-
quences of the title currently being played back. To do
this:
2
To continue playing back the file, press the PLAY button.
Stop playback (Stop)
1
Press the A–B button as soon as the beginning of the
required sequence is played back. A TO B SET A is
shown on the television screen.
To stop the playback of a file, press the STOP button.
Playback stop with resume function
2
Press the A–B button again as soon as the end of the
required sequence has been played back. Take note
that the beginning and the end of the sequence must
be within one title. A TO B SET B is shown on the televi-
sion screen.
The combination unit automatically saves the position
at which the playback is stopped. This function is called
resume function. If you press the PLAY button once more,
then the playback will continue at the saved position.
The repeat playback of the selected sequence begins im-
mediately. The sequence is repeated again and again until
the A–B button is pressed again. A TO B CANCELLED is
shown on the television screen.
Playback stop without resume function
The saved position is deleted if you press the STOP but-
ton a second time. If you press the PLAY button once more,
then the playback of the first file/of the first file in the first
sub-folder of the CD-R/CD-RW starts.
MP3/JPEG mode
Selecting a file
Information on the JPEG mode:
You can select files on an inserted CD-R/CD-RW in the fol-
lowing ways:
Only JPEG files with a resolution of max. 1600 x 1200
pixels can be played back. JPEG files with a higher reso-
lution cannot be played back.
Skip to the beginning of the title (Skip)
With the SKIP forwards and SKIP backwards buttons you
can skip throughout the contents of the CD-R/CD-RW dur-
ing the playback
Playback MP3/JPEG files
To play back CD-Rs/CD-RWs with MP3 and JPEG files with
the combination unit:
•
forwards to the beginning of the next file or
1
2
3
Open the disc tray of the combination unit with the
OPEN/CLOSE button.
•
backwards to the beginning of the file currently being
played back
Insert a CD-R/CD-RW with MP3/JPEG files with the la-
belled side upwards in the disc tray.
The selected file is played back immediately without you
having to press the PLAY button. The number of the file is
shown in the display of the combination unit on the left of
the playback time.
Close the disc tray with the OPEN/CLOSE button.
29
KH 2370
If folders exist:
3
Playback is continued immediately at the selected time
position.
In this case you can only skip throughout the sub-file cur-
rently selected
Only to play back MP: Repeating
sequences (A–B)
•
forwards to the beginning of the next file or
You can repeatedly play back any sequence of the file cur-
rently being played back with this function. To do this:
•
backwards to the beginning of the file currently being
played back
1
Press the A–B button as soon as the beginning of the
required sequence is played back. A TO B SET A is
shown on the television screen.
Selecting files with number buttons
To select a file directly by entering the file number with
the number buttons:
2
Press the A–B button again as soon as the end of the
required sequence has been played back. Please note
that the beginning and the end of the sequence have
to be within one file. A TO B SET B is shown on the tel-
evision screen.
1
Press the number button on the remote control corre-
sponding to the file number.
Example: If you would like to select file number 3,
then press the number button 3.
The repeat playback of the selected sequence starts im-
mediately. The sequence is repeated again and again until
the A–B button is pressed again. A TO B CANCELLED is
shown on the television screen.
Two-digit file numbers are entered with the 10+ but-
ton and the number buttons 0 to 9.
Example: If you would like to select file number
21, then press the 10+ button twice. Then press the
number button 1.
Only to play back JPEG: Rotating
pictures
During the picture display you can rotate the picture cur-
rently being shown in 90° steps. To do this:
The input numbers are shown on the television screen.
The playback of the file with the input number now be-
gins automatically.
1
2
Press the ANGLE button. Every time you press the AN-
GLE button, the current picture is rotated by 90°. Each
selected rotation step – between 90° and 270° – is
shown on the television screen.
If folders exist:
With the number buttons you can only select files to be
played back which are within the current sub-folder.
Press the ANGLE button again when a picture has been
rotated by 270°; the picture will now be displayed in its
original position.
Only to play back MP: Select file
passages using time position
Operating the SMART NAVI menu
To select a certain passage of a file by entering its time
position:
If you have selected the option MIT MENÜ in the subitem
SMART NAV of the OSD menu: The SMART NAVI menu will
be shown on the television screen as soon as the content
of a MP3/JPEG CD-R/CD-RW has been loaded.
1
Press the GOTO button while the file is being played
back. The GOTO menu is shown on the television
screen:
Note:
GOTO _ _:_ _
MP3 and JPEG files on CD-Rs/CD-RWs can be stored in
folders. This can e. g. be useful to organise files from
different genres. The following steps are therefore de-
scribed both for MP3/JPEG CD-Rs/CD-RWs with and
without folder structure.
2
Enter the time position in the marked input field with
the number buttons 0 to 9.
Example: You would like to select a passage which
starts one minute after the beginning of the file. Press
the number buttons one after the other
Please look at the chapter “Glossary/Index” for more infor-
mation on this subject.
•
•
0, 1 for 1 minute;
0, 0 for 0 seconds
In the SMART NAVI menu the following are displayed:
30
KH 2370
If no folders exist:
SMART NAVI
ROOT
SMART NAVI
ROOT
. . .
0
1
2
3
FOLDER 1
FOLDER 2
FOLDER 3
ABC 1
ABC 2
ABC 3
ROOT
ABC 1
ABC 2
0
1
2
PLAY MODE
FOLDER
PLAY MODE
FOLDER
•
•
on the left hand side, all sub-folders with files (num-
bered in sequence) on the inserted CD-R/CD-RW
•
on the left hand side, the main folder (“Root”) on the
inserted CD-R/CD-RW
on the right hand side, all files (numbered in sequence)
within the sub-folder currently selected
•
on the right hand side, all files on the inserted CD-R/
CD-RW (called ABC 1 and ABC here)
4
Change to the list of files using the control buttons.
Also use the control buttons to change between the in-
dividual files on the list. Press the ENTER button to se-
lect a file for playback. The selected file is now played
back.
•
below the mode selection bar
Please go directly to step 4 and continue reading 4.
If folders exist:
Changing folders (If folders exist)
SMART NAVI
Would you like to play back files from another sub-folder,
then first of all change from the current folder to the re-
quired folder. To do this:
ROOT
ROOT 0
FOLDER 1
FOLDER 2
1
2
1
2
3
If a file is being played back, first of all stop the play-
back by pressing the STOP button twice.
PLAY MODE
FOLDER
•
on the left hand side, the main folder (“Root”) on the
inserted CD-R/CD-RW
Change from the list of files to the list of sub-folders us-
ing the control buttons.
•
on the right hand side, all sub-folders with files on the
inserted CD-R/CD-RW (called Folder 1 and Folder 2
here)
Select the sub-folder to which you would like to
change using the control buttons.
4
5
Confirm your selection with the ENTER button.
•
below the mode selection bar
In the menu, the list of the files in this sub-folder will
be displayed again on the right.
Firstly the first sub-folder on the right hand side is selected
automatically.
6
7
Select a new file for playback using the control buttons
and the ENTER button.
1
2
3
Change between the individual sub-folders using the
control buttons.
To get back to the main directory: Change from the list
of files to the list of sub-folders using the control but-
tons. Select the root folder using the control buttons.
Press the ENTER button. Now the main directory is dis-
played again.
Press the ENTER button to display the contents of a se-
lected folder.
The following is now displayed in the SMART NAVI
menu:
Selecting playback mode (Play Mode)
To play back MP3 or JPEG files you can choose the follow-
ing playback modes:
31
KH 2370
FOLDER
If folders exist:
If no folders exist:
All files in the sub-folders on the CD-R/CD-RW are played
back one after the other. The playback finishes with the
last file in the last sub-folder.
All files on the CD-R/CD-RW are played back one after the
other. The playback finishes with the last file on the CD-R/
CD-RW.
DISC REP
If folders exist:
If no folders exist:
All files in the current sub-folder are played back one after
All files on the CD-R/CD-RW are played back one after the
the other. The playback finishes with the last file in the cur- other. After the last file the playback begins with the first
rent sub-folder.
FOLDER REP
If no folders exist:
file on the CD-R/CD-RW.
If folders exist:
All files in all sub-folders on the CD-R/CD-RW are played
back one after the other. After the last file in the last sub-
folder the playback begins again with the first file in the
first sub-folder.
All files on the CD-R/CD-RW are played back one after the
other. After the last file the playback begins again with the
first file on the CD-R/CD-RW.
The disc continues to be repeated until the playback is
stopped by pressing the STOP button.
If folders exist:
All files in the current sub-folder are played back one after
the other. After the last file the playback of the first file in
the sub-folder begins again.
RANDOM
If no folders exist:
The folder is continually repeated until you stop the play-
back by pressing the STOP button.
All files on the CD-R/CD-RW are played in random order.
If folders exist:
DISC SCAN
All files in the current sub-folder are played in random or-
der.
This mode provides you with a quick overview of all files
on an inserted CD-R/CD-RW.
The RANDOM playback is continued until the playback is
stopped by pressing the STOP button.
If no folders exist:
The files on the CD-R/CD-RW are played for a few seconds
one after the other. The playback finishes with the last file
on the CD-R/CD-RW.
SHUFFLE ON
If no folders exist:
If folders exist:
All files on the CD-R/CD-RW are played in random order.
The random playback is continued until each file on the
CD-R/CD-RW has been played once.
All files in the sub-folders on the CD-R/CD-RW are played
back for a few seconds one after the other. The playback
finishes with the last file in the last sub-folder.
If folders exist:
DISC
All files in the current sub-folder are played in random
order. The random playback is continued until each file in
the current sub-folder has been played once.
PROGRAM PO
If no folders exist:
All files on the CD-R/CD-RW are played back one after the
other. The playback finishes with the last file on the CD-R/
CD-RW.
If no folders exist:
With this function you can select certain files on the CD-R/
CD-RW for programmed playback. You can determine the
order in which the files are played back.
32
KH 2370
If folders exist:
3
Confirm the selection by pressing on the ENTER button
on the remote control. The selected file is now dis-
played as the first programmed file on the top of the
SMART NAVI menu,.
With this function you can select certain files in the current
sub-folder for programmed playback. You can determine
the order in which the files are played back.
Example: If you have programmed the fifth file (in the
To operate the programmed playback function, go to the
corresponding chapter and continue reading.
current sub-folder), then Program 01:0005 is displayed.
4
5
6
7
Repeat steps 1 and 2, until all required files have been
programmed.
SINGLE
The currently selected file is played back once.
Then press the STOP button. PROG-END is displayed in
the mode selection bar.
REP-ONE
Press the PLAY button to start the playback of the pro-
grammed files.
The currently selected file is played back repeatedly. The
repeat playback is continued until you stop the playback
by pressing the STOP button.
To delete the programmed playback, change to anoth-
er playback mode.
Selecting playback mode
1
If a file is being played back, first of all stop the play-
back with the STOP button.
Cleaning the
combination unit
2
Change from the list of the files to the mode selection
bar with the right control button. Firstly the FOLDER
playback mode is selected automatically.
Clean the casing of the combination unit only with a
slightly damp cloth and a mild detergent. Pay attention
that no moisture enters into the combination unit!
3
4
You switch through the different playback modes with
the up and down control buttons.
Clean the inside of the disc tray – if necessary – only with a
clean dry brush (e. g. lens brush, can be bought in special-
ised camera shops). Never clean the inside of the disc tray
with a wet cloth!
If the required playback mode is displayed, then exit
the mode selection bar with the left control button.
The marking is now in the list of the files of the select-
ed sub-folder again.
Warning!
5
To start the playback in the set mode, press the PLAY
button. The playback starts with the marked file in the
list of files.
If moisture penetrates into the combination unit, there
is a risk of getting an electric shock! In addition this can
cause irreparable damage to the combination unit!
Programmed playback (Program)
If you have selected the PROGRAM PO mode, to select sev-
eral files for programmed playback:
To rectify malfunctions
and errors
1
2
Change back to the list of the files of the current sub-
folder using the control buttons.
Nothing appears on the display/
combination unit shows no function,
although it is switched on
Select the first file to be programmed using the control
buttons.
Note:
A
Check whether the power cord has been plugged into
the power socket properly.
If folders exist: You can only select files for programmed
playback from the currently selected sub-folder. Files
from different sub-folders can not be selected for pro-
grammed playback.
B Check whether the power socket, in which you have
plugged the power cord of the combination unit, has
electric current, by connecting another device to the
power socket. If necessary, plug in the power cord of
the combination unit into another power socket.
33
KH 2370
C
Switch off the combination unit by pressing the POW-
ER button and then wait ten seconds. Then switch the
combination unit back on, by pressing the POWER but-
ton again.
the television, to be able to use the combination unit
with the television.
D Check the operating instructions of any possible con-
nected audio component, whether adjustments are
necessary, to be able to use this component with the
television.
Display shows No Disc, although a disc
has been inserted
A
The disc is dirty, scratched or damaged.
E
If you
B The country code of the inserted DVD/VCD/S-VCD
does not match the country code of the combination
unit. The DVD/VCD/S-VCD cannot be played on the
combination unit.
•
have connected the combination unit to a stereo tel-
evision, but not to an audio component or
•
have connected the combination unit to a Dolby Pro-
logic compatible audio component via the analog
stereo output (with a cinch cable to the AUX IN L and R
cinch jacks)
Inserted disc is not being played back
A film of condensation has probably formed on the laser
scanning lens of the combination unit. This can be the
case, in particular, if the combination unit has been ex-
posed to severe fluctuations in temperature.
then check whether in the OSD menu item SPEAKER
SETUP, the stereo downmix has been switched on.
No : or : picture
In this case put the combination unit in a
dry environment with a normal room temperature. First
of all remove any possible inserted disc from the disc tray.
Then leave the combination unit switched on for at least
one hour without using it until the film of condensation
has evaporated.
Check the operating instructions of the television to find
out which picture format the television has.
Then check whether the settings in the OSD menu item TV
DISPLAY match the available picture formats of the televi-
sion.
No picture or black and white picture
Remote control without function
A
Check whether the connecting cable(s) between the
combination unit and the television are firmly plugged
into the corresponding jacks.
A
Check whether the batteries in the remote control
have been put into the battery compartment with the
correct polarities.
B Check whether the settings in the OSD menu item VID-
EO OUTPUT match the connecting variant with which
you have connected the combination unit to the tel-
evision.
B Check whether the batteries in the remote control are
exhausted and if necessary change both batteries.
C
Ensure that there are no obstacles between the remote
control and the combination unit.
C
Check the operating instructions of the television to
see, whether possible adjustments are necessary on
the television, to be able to use the combination unit
with the television.
D Do not move more than 5 meters away from the com-
bination unit when using the remote control.
No sound
Playback language/Subtitle language
does not correspond to the language in
the settings in the OSD menu
A
Check whether the television and/or combination unit
are possibly switched to mute.
The playback language/subtitle language input in the
OSD menu is not available on the inserted disc.
B Check whether all the connecting cables between the
combination unit, surround loudspeakers and sub-
woofer are plugged in firmly into the corresponding
terminals/jacks. In addition check whether the sub-
woofer is switched on.
One or more functions cannot be
switched on
Not all functions are available on the combination unit
with all DVDs/VCDs/S-VCDs, audio CDs and also CD-Rs/CD-
RWs with MP3 and JPEG files. Functions, which cannot be
C
Check the operating instructions of the television to
see, whether possible adjustments are necessary on
34
KH 2370
switched on, are display by the symbol appearing on
the television screen.
them of 20 minutes (8 cm format) and 74 minutes (12 cm
format) respectively
No button on the unit or on the remote
control works/other malfunctions
There are two versions of VCDs:
•
Version 1.1 VCDs/S-VCDs can only play audio and video
data.
A
Switch off the combination unit with the POWER but-
ton. Wait ten seconds and the press the POWER button
once more to switch on the combination unit again.
•
Version 2.0 VCDs/S-VCDs have so-called PBC (Playback
Control) functions. In addition, fixed images with high-
er resolution can be played back
B If the malfunction still occurs afterwards: Set the com-
bination unit back to the settings made in the factory.
To do this, look at the chapter“Setting the combination What are titles and chapters?
unit back to the settings made in the factory”.
The largest units of picture and sound units on DVDs
Consult one of our service partners in your
neighbourhood if
are called titles; on many DVDs, the (main) film has title
number 01. For bonus material (e. g. film trailers, back-
ground information etc.), which is available on many DVDs,
other title numbers can possibly be used.
•
the described malfunctions cannot be rectified as de-
scribed or
The next smallest picture and sound units below titles are
called chapters. If the title(s) of a DVD is(are) subdivided
into chapters, then numbers are allocated to them and if
these numbers are entered, then the chapters can be se-
lected directly.
•
other malfunctions which have not been described
occur.
Warning!
Never open the casing of the combination unit! The unit
does not have any parts that can be maintained by the
user! If the casing of the unit is opened then the guaran-
tee expires!
Please note that not on all DVDs
•
is(are) the title(s) subdivided in (numbered) chapters
•
are the chapters also described as scenes (e. g. in the
main menu of DVDs)
No liability/guarantee will be assumed for damages
which arise from opening the casing of the unit or from
trying to repair the unit and which are not carried out by What are Scart, S-Video, composite
specialized qualified personnel!
video?
Scart
Glossary/Index
Scart describes a 21-pin standard plug-type connection
through which the RGB signals, video signals and S-Video
signals as well as quite a few control and additional signals
are transmitted.
What are DVDs, VCDs and S-VCDs?
DVDs
S-Video
DVD is the abbreviation for Digital Versatile Disc. DVDs
serve to store audio and video data; they are available in 8
cm and 12 cm (diameter) formats. DVDs offer – thanks to
When connecting a DVD player to a television via S-Video,
brightness and colour signals are separated; this achieves
their storage capacity which is many timer higher than CD- a higher focus and a lower so-called“coloured noise”. Col-
Rs/CD-RWs – a playback duration of the audio and video
data stored on them of up to eight hours.
oured noise is what one calls the overlaying of the col-
oured, mostly strongly saturated parts of a video image
made by an irregular, turbulent structural disturbance.
VCDs/S-VCDs
Composite video
Video-CD (VCD) and Super Video-CD (S-VCD) describe two
methods for compressed– i.e. to save space – storage of
films on CDs. VCDs and S-VCDs are available in 8 cm and
12 cm (diameter) formats. Their storage capacity is many
times lower than that of DVDs. Therefore they only offer a
playback duration of the audio and video data stored on
Video signal or FBAS signal; this is a picture signal in which
both colour and brightness information is contained si-
multaneously.
35
KH 2370
Decoder
SECAM
The sound on DVDs with home cinema surround sound
is stored in a coded form on the DVD. There are different
coding formats for different purposes, e. g. AC-3 to play
Dolby Digital surround sound. To be able to play coded
sound, the playback unit (e. g. the combination unit) must
have a so-called decoder, which transforms the coded sig-
nals back into music or sound.
SECAM is the abbreviation for the French“système en cou-
leur avec mémoire”. SECAM is the normal and most com-
monly used colour television standard in France and many
Eastern European countries.
Audio CDs
Audio CDs only contain audio data; these are also availa-
ble with 8 cm and 12 cm (diameter) formats. The playback
duration of the audio data stored on them is 20 minutes
(8 cm format) and 74 minutes (12 cm format) respectively.
Audio data with CDA format are stored on audio CDs.
The eBench KH 2370 combination unit has an AC-3 decod-
er (for Dolby Digital 5.1 surround sound signals).
Dolby Surround
Dolby Surround is an analog sound format whereby the
two channels of a stereo sound signal are used to accom-
modate surround sound information for other channels.
With a Dolby Surround Decoder, the signals are trans-
formed back into sound or music and are conducted to
two additional loudspeakers, which are to be placed be-
hind the listening position.
MP
MP3 describes a procedure or format to compress audio
data developed by the Fraunhofer Institut. Pieces of music
compressed in MP3 format only have a fraction of their
original size, which allows far more music to be stored e.
g. on CD-Rs/CD-RWs than on normal audio CDs, on which
audio data is stored in CDA format.
Dolby Prologic
JPEG
By comparison with the Dolby surround sound format,
in the case of Dolby Prologic a further channel is used in
the stereo signal; this is the so-called“Center”channel.
The corresponding center loudspeaker is to be placed in
the centre between the stereo loudspeakers. The lowest
tones are to be conducted to a low tone loudspeaker, the
so-called“subwoofer”. The subwoofer can be placed at any
position in the room; the reason for this is that the low
JPEG (abbreviation of Joint Photographics Expert Group)
describes a commonly used graphic format developed by
the same named organisation, with which picture data in
coloured and grey tones is compressed.
What are folders?
tones which are emitted by the subwoofer, can scarcely be In contrast to audio CDs, the titles of a CD-R/CD-RW with
exactly located by the human ear.
MP3 or JPEG files can be stored in folders, for example, to
organize titles from different genres. If the MP3 files were
stored in folders, then the structure of an MP3 CD can look
like the following, for example:
Dolby Digital (5.1)
Dolby Digital, also called AC3, is a digital sound format, by
which up to six separate audio channels can be transport-
ed. In the case of most of the current DVDs, the sound is
stored in the so-called“Dolby Digital 5.1”format; the“5”in
the description“5.1”stands for three front and two back
surround sound channels, the“1”for the low tone channel.
MP3 CD
Folder
MP3 files
What are PAL, NTSC and SECAM?
PAL
PAL is the abbreviation for Phase Alternation Line. PAL is
in Central and Western Europe (exception: France, see ab-
breviation SECAM), the normal and commonly used colour
television standard.
NTSC
NTSC is the abbreviation for National Television System
Committee. NTSC is a colour television standard which is
used, above all, in the USA and in Japan.
36
KH 2370
KH
IB v. ./ . .
Kompernaß Handelsgesellschaft mbH • Burgstraße • D- Bochum, Germany
|
Indesit Dishwasher IDTM User Manual
Insignia Dryer Accessories NS LT600P 2 User Manual
Intel Computer Hardware IMB200 User Manual
Kalorik Marine Instruments USK FP 5 User Manual
KEF Audio Speaker 290149ML User Manual
Keurig Coffeemaker B70 User Manual
Kicker Marine Instruments 10ZXM3504 User Manual
KitchenAid Refrigerator Cabinet Depth Side by Side Refrigerator User Manual
Klipsch Portable Speaker KL 650 THX User Manual
Kodak Scanner i1310 User Manual